Skip to main content

Publications 2013

Publications 2013

Abdelgaied A, Brockett CL, Liu F, Jennings LM, Fisher J, Jin Z. Quantification of the effect of cross-shear and applied nominal contact pressure on the wear of moderately cross-linked polyethylene. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE 227(H1):18-26 January 2013

Al-Hajjar M, Fisher J, Williams S, Tipper JL, Jennings LM. Effect of Femoral Head Size on the Wear of Metal on Metal Bearings in Total Hip Replacements under Adverse Edge Loading Conditions. Journal of Biomedical Materials Research. Part B: Applied Biomaterials 101B:213–222 February 2013 

Al-Hajjar M, Fisher J, Tipper JL, Williams S, Jennings LM. Wear of 36-mm BIOLOX(R) delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions. Proc Inst Mech Eng H 227(5):535-542 May 2013

Al-Hajjar M, Jennings LM, Begand S, Oberbach T, Delfosse D, Fisher J. Wear of Novel Ceramic-on-Ceramic Bearings under Adverse and Clinically Relevant Hip Simulator Conditions. J Biomed Mater Res B Appl Biomater 101B: 1456–1462, November 2013

Aldridge A, Ingham E, Kouroupis D, Churchman S, English A, Jones E. Assay validation for the assessment of adipogenesis of multipotential stromal cells-a direct comparison of four different methods. Cytotherapy 15(1):89-101 January 2013

Behl B, Papageorgiou I, Brown C, Hall R, Tipper JL, Fisher J, Ingham E. Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells. Biomaterials 34(14):3547-3558 May 2013

Bladen CL, Tzu-Yin L, Fisher J, Tipper JL.  In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components.  J Biomed Mater Res B Appl Biomater 101 B(3):407-413 April 2013

Bladen CL, Russell SL, Fisher J, Ingham E, Tipper JL, Teramura S, Tomita N, Fujiwara K. Analysis of wear, wear particles, and reduced inflammatory potential of vitamin e ultrahigh-molecular-weight polyethylene for use in total joint replacement. Journal of Biomedical Materials Research - Part B Applied Biomaterials 101 B(3):458-466 April 2013

Brockett CL, Williams S, Jin Z, Fisher J, Isaac GH.  Squeaking Hip Arthroplasties. A Tribological Phenomenon.  Journal of Arthroplasty 28(1):90-97 January 2013

Brown C, Mukonoweshuro B, Fisher J, Ingham E, Lacharme-Lora L, Sood A, Case CP, Newson RB. Consequences of exposure to peri-articular injections of micro- and nano-particulate cobalt-chromium alloy. Biomaterials 34(34):8564-8580 November 2013

Damion RA; Radjenovic A; Ingham E; Jin Z; Ries ME Orthogonal invariant sets of the diffusion tensor and the development of a curvilinear set suitable for low-anisotropy tissues. PLoS ONE, vol. 8, pp.e78798. November 2013.

Durham ER; Ingham E; Russell SJ Technique for internal channelling of hydroentangled nonwoven scaffolds to enhance cell penetration. Journal of Biomaterials Applications, vol. 28, pp.241-249. August 2013.

Fisher J. Chp 17 Wear of Hard-on-Hard Bearings in the Hip. The Influence of Loss of Conformity Under Edge Loading. Total Hip Arthroplasty Tribological Considerations & Clinical Consequences EFORT Reference in Orthopaedics and Traumatology, Editor K Knahr ISBN 978-3-642-35652-0. DOI 10.1007/978-3-642-35653-7  Publisher Springer, June 2013

Hadley M, Hardaker C, Isaac G, Williams S, Jin Z, Fisher J. Development of a stop-dwell-start (SDS) protocol for in vitro wear testing of metal-on-metal total hip replacements. ASTM Special Technical Publication 1560 STP:271-291 May 2013

Hasan J, Fisher J, Ingham E. Current strategies in meniscal regeneration. J Biomed Mater Res B Appl Biomater epub 13 Sep 2013

Hogg P, Rooney P, Kearney JN, Ingham E. Development of a decellularised dermis. Cell and Tissue Banking 14(3):465-474 September 2013

Holton C; Bobak P; Wilcox R; Jin Z Impaction grafted bone chip size effect on initial stability in an acetabular model: Mechanical evaluation. Journal of Orthopaedics, vol. 10, pp.177-181. December 2013.

Huang Q, Rooney P, Kearney JN, Ingham E. Production of a sterilised decellularised tendon allograft for clinical use. Cell and Tissue Banking 1-10 February 2013

Jin Z, Lian Q, Wang L, Zhao Y, Li D, Wang Z, Liu P. Custom-made bipolar hemi-knee prosthesis design and clinical application. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 49(6):12-20 20 Mar 2013

Leslie I, Williams S, Isaac G, Hatto P, Ingham E, Fisher J. Wear of surface-engineered metal-on-metal bearings for hip prostheses under adverse conditions with the head loading on the rim of the cup. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227(4):345-349 April 2013

Li J, Stewart TD, Jin Z, Wilcox RK, Fisher J. The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers. Journal of Biomechanics 46 (10)1641–1647 21 June 2013

Liu F, Fisher J, Jin Z. Effect of motion inputs on the wear prediction of artificial hip joints. Tribology International 63:105-114 2013 July 2013

Liu F, Williams S, Jin Z, Fisher J. Effect of head contact on the rim of the cup on the offset loading and torque in hip joint replacement. Proc Inst Mech Eng H 227,11, 1147-1154  November 2013

Lizhang J, Taylor SD, Jin Z, Fisher J, Williams S. Effect of clearance on cartilage tribology in hip hemi-arthroplasty. Proc Inst Mech Eng H 227(12) 1284–1291 December 2013

Maude S, Aggeli A, Ingham E. Biomimetic self-assembling peptides as scaffolds for soft tissue engineering. Nanomedicine 8(5):823-847 May 2013

McWilliams AB, Douglas SL, Redmond AC, Grainger AJ, O'Connor PJ, Stewart TD, Stone MH. Litigation after hip and knee replacement in the National Health Service. Journal of Bone and Joint Surgery - Series B 95 B(1):122-126 January 2013

McWilliams AB, Grainger AJ, O'Connor PJ, Redmond AC, Stewart TD, Stone MH. A review of symptomatic leg length inequality following total hip arthroplasty. HIP International 23(1):6-14 2013

Meng Q, Liu F, Fisher J, Jin Z. Effect of simplifications of bone and components inclination on the elastohydrodynamic lubrication modeling of metal-on-metal hip resurfacing prosthesis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227(5):523-534 May 2013

Meng Q, Liu F, Fisher J, Jin Z. Contact mechanics and lubrication analyses of ceramic-on-metal total hip replacements. Tribology International 2012 63:51-60 July 2013

Meng Q, Jin Z, Fisher J, Wilcox R. Comparison between FEBio and Abaqus for biphasic contact problems. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227(9):1009-1019 September 2013

Moazen M, Mak JH, Jones AC, Jin Z, Wilcox RK, Tsiridis E. Evaluation of a new approach for modelling the screw-bone interface in a locking plate fixation: A corroboration study. Proc Inst Mech Eng H vol. 227 no. 7 746-756 July 2013

Moazen M, Mak JH, Etchels LW, Jin Z, Wilcox RK, Jones AC, Tsiridis E. The effect of fracture stability on the performance of locking plate fixation in periprosthetic femoral fractures Journal of Arthroplasty 28(9):1589-1595 October 2013

Moazen M, Mak JH, Etchels LW, Jin Z, Wilcox RK, Jones AC, Tsiridis E. Periprosthetic Femoral Fracture - A Biomechanical Comparison Between Vancouver Type B1 and B2 Fixation Methods. Journal of Arthroplasty 2013 epub 12 September 2013

Morticelli L, Thomas D, Roberts N, Ingham E, Korossis S. Investigation of the suitability of decellularized porcine pericardium in mitral valve reconstruction. J Heart Valve Dis. 22(3):340-53 May2013

Nogiwa-Valdez AA, Rainforth WM, Stewart TD. Wear and degradation on retrieved zirconia femoral heads. Journal of the Mechanical Behavior of Biomedical Materials 2013 epub 5 October 2013

Pai SK, Whitwell G, McMurray D, Stone MH, Stewart TD. Long-term results of a total knee prosthesis utilising an all polyethylene tibial component. Archives of Orthopaedic and Trauma Surgery 133(8):1143-1148 Aug 2013

Raghunathan VK, Devey M, Case CP, Hawkins S, Hails L, Davis SA, Mann S, Chang IT, Ingham E, Lane JD, et al.. Influence of particle size and reactive oxygen species on cobalt chrome nanoparticle-mediated genotoxicity. Biomaterials 34(14):3559-3570 May 2013

Rehman S, Garner PE, Aaron JE, Wilcox RK.  The use of preserved tissue in finite element modelling of fresh ovine vertebral behaviour.  Comput Methods Biomech Biomed Engin 16(11):1163-1169 November 2013

Riches K, Angelini TG, Mudhar GS, Kaye J, Sohrabi S, Scott DJA, Porter KE, Bailey MA, Walker PG, Korossis S et al.  Exploring smooth muscle phenotype and function in a bioreactor model of abdominal aortic aneurysm. Journal of Translational Medicine 11(1) 208 (13 pages) 12 September 2013

Tarsuslugil SM, Barton DC, Wilcox RK, O'Hara RM, Dunne NJ, Buchanan FJ, Orr JF. Development of calcium phosphate cement for the augmentation of traumatically fractured porcine specimens using vertebroplasty. Journal of Biomechanics 46(4):711-715 February 2013

Whitwell G, Brockett C, Young S, Stone M, Stewart TD. Spectral analysis of the sound produced during femoral broaching and implant insertion in un -cemented total hip arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227(2):175-180 February 2013

Wijayathunga VN, Oakland RJ, Jones AC, Hall RM, Wilcox RK. Vertebroplasty: Patient and treatment variations studied through parametric computational models. Clin Biomech vol 28 issue 8, 860–865 October 2013

Williams S, Al-Hajjar M, Issac GH, Fisher J. Comparison of ceramic-on-metal and metal-on-metal hip replacements under adverse conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials 101B:770–775 July 2013